P0C32
Hybrid/EV Battery Cooling System A Performance
P0C32 is the functional check of the battery thermal system that CARB asks for. GM tunes it per vehicle: the 2012 Volt (12OBDG01A) fails it when the average pack temperature stays above 40 °C in active cooling or below −17 °C in active heating, after 4200 s or 9000 s, Type A, one trip. The Two-Mode trucks (12OBDG06) compare the hottest module with a limit that rises with inlet temperature, from 45 °C to about 65 °C, Type B. The air-cooled eAssist (13OBDG05C) models the power pack temperature after six hours off and fails above 15 °C deviation, Type B. GM bulletin PIP4992C links P0C32 on 2012–2016 eAssist cars to a pack fan that stops at low 12 V voltage and calls for reprogramming and fan replacement. B and C circuits use P2D3F and P2D40.
Possible causes
- Battery cooling fan stopping at low 12 V system voltage (GM eAssist) high
- Low coolant, air or a weak pump in a liquid-cooled pack circuit medium
- Blocked cooling air intake or ducts of an air-cooled pack medium
- Failed pack heater or chiller valve low
Symptoms
- MIL and hybrid system warning
- Reduced electric range or assist
- Charging system or battery warning message (eAssist)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0C32
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2012/12OBDG01A HYBRID Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2012/12OBDG06 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG05C Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2016/MC-10113966-9999.pdf
- law.cornell.edu/regulations/california/13-CCR-1968.2