OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C31

Inverter B Cooling System Performance

P0C31 reports that the cooling circuit of a second power inverter does not remove heat as expected; inverter A has its own code, P0A93. Vehicles with two separately cooled power electronics units, for example a front and a rear drive unit, need this second code. CARB requires hybrid OBD to monitor the parts used for inverter thermal management and, where feasible, to check the cooling performance itself. No manufacturer documents P0C31 publicly. For the analogous P0A93, Hyundai's 2011 Sonata Hybrid bulletin 14-HC-001 points to the electric water pump, and coolant pump faults of the B circuit are reported as P0B38 or P0C74. To protect the semiconductors the controller limits motor power. A low coolant level or trapped air is worth checking first.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 31

Possible causes

  • Low coolant level or air trapped in the inverter B circuit high
  • Weak or failed electric coolant pump of the circuit medium
  • Clogged radiator or inoperative cooling fan low

Symptoms

  • Hybrid or EV system warning and MIL
  • Reduced drive power, especially under load or in heat
  • Coolant level low in the electronics reservoir

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0C31

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication