OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C2C

Electric/Auxiliary Transmission Fluid Pump Control Module Feedback Signal Range/Performance

P0C2C means the feedback signal from the auxiliary pump control module is present and electrically valid but does not make sense, for example a reported speed or status that contradicts the command. No manufacturer documents this exact code publicly. Its siblings show the signal: on GM's Two-Mode trucks P0C2B watches a fault status message expected every 1.5 s, and on the 2021-23 Chevrolet Bolt EV and 2022 Bolt EUV GM bulletin 21-NA-148 pairs P0C2D with the pump performance codes P2797 and P2798, caused by bad solder joints in the low-voltage pump. CARB requires rationality checks for such inputs. Implausible feedback usually points to the pump electronics themselves. P0C2B is the general code, P0C2D and P0C2E the low and high variants.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 2C

Possible causes

  • Electronics of the pump module reporting wrong status or speed high
  • Intermittent contact on the feedback line distorting the signal medium
  • Pump not following the command mechanically, so feedback and command differ low

Symptoms

  • Service Vehicle Soon or MIL
  • Reduced propulsion power or no start-stop

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0C2C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication