OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C29

Electric/Auxiliary Transmission Fluid Pump A Driver Circuit Performance

P0C29 means the driver stage of auxiliary pump A does not behave as commanded, for instance the pump does not reach its target or the activation is reported as implausible. Volkswagen Group documents it on the 7-speed DSG 0GC (DQ381): VW lists P0C29 for the 2018 Golf R as implausible activation of auxiliary hydraulic pump 1 (V475), often with clutch and gear actuator codes as consequences; Audi's bulletin for the 2017-18 A3, A3 Cabriolet and S3 with gearbox dated up to 26 September 2017 calls for replacing the auxiliary hydraulic pump when only P0C29 remains. The customer sees a Gearbox Malfunction warning. VW improved the pump from October 2017 production. P0C2A is a stalled motor, P0C26 to P0C28 current faults.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 29

Possible causes

  • Auxiliary hydraulic pump V475 of early production faulty (VW/Audi 0GC) high
  • Poor contact at the pump electrical connection medium
  • Transmission control software not updated per service action low

Symptoms

  • Gearbox Malfunction warning in the instrument cluster
  • Consequential clutch or gear actuator codes, limp mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C29

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication