OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C28

Electric/Auxiliary Transmission Fluid Pump A Motor Current High

P0C28 is the overcurrent protection of auxiliary pump motor A. GM uses it on Volt, ELR and later hybrids: the inverter trips when any of the U, V or W phases exceeds 35 A, in 2016 within about 4 ms of a 62 ms window, or when the d-axis current falls below a stator temperature limit, Type A, MIL on the first trip. GM service update 18199 for the 2018 Cadillac CT6 plug-in traces P0C28 to a faulty pump restart logic in the software. Ford's TSB 18-2282 lists P0C27 and/or P0C28 on the 2013-17 Fusion Energi and C-Max Energi, fixed by reprogramming the PCM and hybrid module; Ford also reports P0C28 in the SOBDMC of the 2024-25 Mustang Mach-E LFP, solved by software. P0C27 is the low side.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 28

Possible causes

  • Pump control software faulty (Cadillac CT6 update 18199, Ford Energi TSB 18-2282) high
  • Pump seized, contaminated or running against blocked flow medium
  • Short between motor phases or to ground medium
  • Current sensing or power stage in the pump inverter faulty low

Symptoms

  • MIL or service wrench lamp
  • Auxiliary pump shuts down, no auto-stop or electric mode

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0C28

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication