OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C27

Electric/Auxiliary Transmission Fluid Pump A Motor Current Low

P0C27 means motor A of the auxiliary transmission fluid pump draws less current than expected, a sign that the pump is not loaded, for example because it sucks air or turns without delivering. Ford documents it twice. TSB 16-0111 covers 2014-16 Fusion and 2015-16 Edge with the 6F35 transmission and start-stop: MIL, P0C27 in the PCM and a harsh engagement after an auto-stop, caused by air entering the pump supply tube on transmissions built up to 26 February 2016; a new tube with a check ball fixes it. TSB 18-2282 for the 2013-17 Fusion Energi and C-Max Energi lists P0C27 and/or P0C28 and calls for reprogramming the PCM and hybrid module. P0C28 is the high side, P0C26 the general code, P0C2A a stalled motor.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 27

Possible causes

  • Air entering the pump supply tube (Ford 6F35, new tube with check ball) high
  • Calibration of PCM and hybrid module (Ford Fusion/C-Max Energi) medium
  • Low transmission fluid level letting the pump draw air medium
  • High resistance or open circuit in the pump motor wiring low

Symptoms

  • MIL on
  • Harsh transmission engagement after a start-stop event

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0C27

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication