OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C21

Electric/Auxiliary Transmission Fluid Pump Phase U-V-W Circuit Low

P0C21 reports a low condition on the phase U, V or W circuits of the auxiliary pump motor, usually a phase lead shorted to ground or a voltage at a phase terminal that stays below what the inverter commands. No manufacturer documents this exact code publicly. GM watches the same wiring on the Volt and ELR with the open-circuit code P0C20 and catches shorts through overcurrent on P0C28 and its own phase current sensor codes P1E2A to P1E32. The Hitachi idle-stop pump patent shows that the inverter often reconstructs all phase currents from one DC-bus shunt, so a ground short and a sensing fault can look alike. The pump usually shuts down, auto-stop is blocked. P0C20 is the open circuit, P0C22 the high side, P0B01 to P0B08 the per-phase current codes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 21

Possible causes

  • Phase lead chafed through and shorted to ground or the transmission case high
  • Transmission fluid or water in the motor connector creating a leakage path medium
  • Low-side switch or phase sensing in the pump inverter faulty medium
  • Motor winding shorted to the stator core low

Symptoms

  • MIL and transmission or hybrid warning
  • Auxiliary pump off, no engine auto-stop

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0C21

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication