OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C1C

Electric/Auxiliary Transmission Fluid Pump Control Module Internal Temperature Sensor Circuit

P0C1C is the general circuit fault of the temperature sensor inside the auxiliary pump control module, used when the signal is invalid without fitting the low, high or range checks. No manufacturer documents it publicly. GM's 2016 ELR pump controller monitors its inverter sensor with own codes P1E34 to P1E36 instead, and the Honda CVT pump patent shows why the reading matters: it is the basis for switching the pump off before the board overheats. Without a valid value the controller cannot protect itself, so the pump usually runs restricted or stays off. CARB requires such sensors to be checked for circuit faults. Because the sensor is on the circuit board, the fix is normally the module or the pump assembly. P0C1D to P0C1F are the specific variants.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 1C

Possible causes

  • Temperature sensor or its measuring circuit on the module board faulty high
  • Unstable supply or ground of the pump module distorting the sensor reading medium
  • Moisture or fluid inside the module housing low

Symptoms

  • Warning lamp or transmission message
  • Start-stop function inactive

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0C1C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication