P0C1B
Electric/Auxiliary Transmission Fluid Pump Control Module Internal Temperature Too High
P0C1B is a protection code: the electronics that drive the auxiliary transmission fluid pump measure a valid but excessive internal temperature. No manufacturer documents this exact code publicly. GM shows the same function on the 2016 Cadillac ELR pump controller under its own code P1E37, an in-range overtemperature above 98 °C that could damage the inverter, checked only when the sensor itself is plausible. A Honda patent for a CVT pump explains the reaction: once the board temperature passes a limit, the control unit opens the pump relay and keeps the pump off until the fluid has cooled. The pump then stops, so start-stop and pressure support are lost. P0C1C to P0C1F cover faults of the temperature sensor itself and must be excluded first.
Possible causes
- High transmission fluid temperature from heavy load, towing or a weak fluid cooler high
- Pump running against high resistance (binding, clogged filter) and heating its driver medium
- Poor heat transfer from the module (mounting, contamination) or internal module fault low
Symptoms
- Engine auto-stop temporarily unavailable
- Transmission or hybrid warning, MIL depending on manufacturer
- Harsh engagement when driving off after a stop
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0C1B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.