P0C1A
Drive Motor B Torque Delivered Performance
P0C1A compares the torque command for motor B with the torque the motor control processor calculates as actually delivered. GM's 2016, 2018 and 2019 tables set it when the difference exceeds 132 Nm for 0.1875 s in a 0.2 s window, Type A, one trip, and only while listed resolver and motor control faults are inactive. The 2011 Volt and 2012 two-mode tables also list it, the trucks with a three-phase current sum above 110 A. Chrysler documents it on the 2017 to 2023 Pacifica Hybrid: with resolver codes P0A3F, P0A43 or P0A45 it points to a short in the internal wiring connector of the eFlite transmission, which is replaced. P0C19 is motor A. Expect limp mode.
Possible causes
- Short in the internal transmission wiring connector (Chrysler Pacifica Hybrid 21-008-23) high
- Implausible rotor position signal from the motor B resolver medium
- Hybrid control or inverter module software requiring an update medium
- Faulty phase current sensing for motor B low
Symptoms
- Malfunction indicator lamp
- Vehicle in limp mode with reduced propulsion
- Hybrid system warning, engine runs more often
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C1A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.