P0C19
Drive Motor A Torque Delivered Performance
P0C19 is a plausibility check: the torque that motor A actually delivers, calculated by the motor control processor, does not follow the slewed torque command. GM sets it when the difference exceeds 123 Nm for 0.1875 s within 0.2 s on the 2016 and 2018 tables, Type A, one trip; eAssist uses 36 Nm as Type B, two trips. The 2012 two-mode trucks check whether the sum of the three phase currents exceeds 110 A for 200 ms. Stellantis lists P0C19 on the Jeep Wrangler 4xe and the Wagoneer PHEV with P1B03, a resolver rationality fault, and cures it by reflashing the power inverter module. The electric drive shuts down and the engine takes over.
Possible causes
- Outdated power inverter module software (Stellantis 08-059-25, 08-231-24) high
- Implausible rotor position signal from the motor A resolver or its wiring medium
- Faulty phase current sensing distorting the calculated torque medium
- Internal fault of the inverter power stage or motor winding low
Symptoms
- Malfunction indicator lamp
- Electric drive shuts off and the engine takes over
- Engine stop-start no longer works or a service hybrid system warning appears
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C19
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2012/12OBDG06 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG05C Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG01 Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2025/MC-11015532-0001.pdf
- static.nhtsa.gov/odi/tsbs/2024/MC-11010255-0001.pdf