P0C10
Drive Motor B Inverter Power Supply Circuit High
P0C10 flags a supply of the motor B inverter that is above its permitted range. Its siblings are P0C0E for a lost or open supply and P0C0F for a low one; P0C0D is the motor A version. No manufacturer documents P0C10 publicly. GM uses only the open-circuit code P0C0E for this supply and describes it as the power feed of the gate-drive board, monitored through the status line of the IGBT module. An overvoltage on that rail can damage the driver circuits, so the controller shuts the inverter down. CARB requires hybrid components to be checked for circuit faults. Expect a warning lamp and loss of the electric drive provided by motor B.
Possible causes
- Faulty voltage regulation of the gate-drive supply inside the motor B inverter high
- Excessive 12 V system voltage from the DC/DC converter or an external charger medium
- Supply or sense line shorted to a higher voltage in the harness low
Symptoms
- Malfunction indicator lamp, hybrid system warning
- Reduced propulsion, motor B unavailable
- Vehicle limited to engine or reduced-power operation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C10
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.