OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C0F

Drive Motor B Inverter Power Supply Circuit Low

P0C0F means the supply of the motor B inverter is present but below its permitted range. P0C0E covers a lost or open supply, P0C10 a supply that is too high, and P0C0C is the same fault on motor A. No manufacturer documents P0C0F publicly. GM's tables for P0C0E name the supply in question: the power feed of the gate-drive board, checked phase by phase with run/crank voltage between 9.5 and 18 V on the 2012 trucks. A sagging rail can no longer switch the power transistors fully, so the inverter protects itself. CARB requires circuit monitoring of hybrid components. The driver typically sees a warning and loses the electric drive of motor B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 0F

Possible causes

  • Weak 12 V battery or DC/DC converter output feeding the inverter electronics high
  • Corroded connector or poor ground raising resistance in the inverter supply medium
  • Failing internal gate-drive power supply in the motor B inverter medium

Symptoms

  • Malfunction indicator lamp, hybrid system warning
  • Reduced propulsion, motor B unavailable
  • Fault appears mainly with low 12 V voltage, e.g. after standing

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C0F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication