P0C0D
Drive Motor A Inverter Power Supply Circuit High
P0C0D reports that the supply of the motor A inverter is above its permitted range, while P0C0B stands for a lost or open supply and P0C0C for a supply that is too low. No manufacturer documents this code publicly. GM's tables for the sibling P0C0B show what the supply is: the gate-drive rails of the IGBT module, on eAssist a 5 V and a 15 V rail that are each watched against limits. A rail running too high stresses the driver stage and can falsify the switching of the power transistors. CARB requires hybrid components to be monitored for circuit faults. Expect the inverter to shut down or derate, with reduced or no electric drive.
Possible causes
- Faulty voltage regulation of the gate-drive supply inside the motor A inverter high
- Excessive 12 V system voltage from the DC/DC converter or a charger medium
- Supply or sense line shorted to a higher voltage in the harness low
Symptoms
- Malfunction indicator lamp, hybrid system warning
- Reduced or no electric propulsion from motor A
- Engine runs more often or the vehicle enters limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C0D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.