P0C0C
Drive Motor A Inverter Power Supply Circuit Low
P0C0C reports that the supply voltage of the motor A inverter is present but too low, while P0C0B covers a lost or open supply and P0C0D a supply that is too high. Which supply is meant depends on the maker: GM ties its sibling P0C0B to the gate-drive supply of the IGBTs, Mercedes to the high-voltage feed. Audi documents P0C0C on the 2025 and 2026 A6 and Q6 e-tron family: stored in the electric drive modules together with P0E8D, it comes with a red high-voltage fault warning to stop safely, and the bulletin calls for replacing the affected front or rear power electronics. CARB requires circuit monitoring of hybrid components. Without a stable supply the inverter cannot switch, so drive power is cut.
Possible causes
- Internal fault of the drive power electronics (Audi TSB 2081725) high
- Weak 12 V supply, poor ground or high-resistance connector at the inverter medium
- Weak 12 V battery or DC/DC converter output low
Symptoms
- Red high-voltage system warning asking to stop safely
- Loss of drive power or vehicle will not get ready to drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C0C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.