OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C0B

Drive Motor A Inverter Power Supply Circuit/Open

P0C0B flags a lost or interrupted supply inside the motor A inverter. GM reads it from the IGBT module status: when the gate drive supply falls below its threshold, the module reports a bias fault; on eAssist the 5 V rail below 3.5 to 4.3 V or the 15 V rail below 10.4 to 12.6 V counts, with run/crank above 7 V. The 2012 trucks enable it between 9.5 and 18 V; the 2016 to 2019 tables need 0.002 to 0.168 s of fault within short windows, Type A, one trip. Mercedes applies the code to the high-voltage supply of the inverter in the belt starter-alternator of P3 hybrids (subtypes 16 and 17) and replaces that unit. Expect loss of electric drive or engine start.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 0B

Possible causes

  • Failed gate-drive power supply inside the motor A inverter high
  • Low 12 V feed, blown fuse or poor ground to the inverter control board medium
  • Open high-voltage feed to the inverter, e.g. in a belt starter-alternator (Mercedes LI15.40-P-077947) low

Symptoms

  • Malfunction indicator lamp after one drive
  • Electric drive or motor generator unavailable
  • Engine cannot be started, only electric driving possible (Mercedes P3 hybrids)

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C0B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication