P0C0A
Drive Motor B Phase U-V-W Circuit High
P0C0A reports that a phase line of drive motor B reads too high, typically a short to the positive high-voltage rail or a high-side power switch that stays on. It mirrors P0C07 for motor A and completes the motor B trio with P0C08 (open) and P0C09 (low). No manufacturer documents P0C0A publicly; GM only uses P0C08 for motor B phase circuits, based on missing phase current. CARB requires hybrid components to be monitored for circuit faults. A phase stuck high leads to uncontrolled current, so the inverter switches motor B off immediately and P0C04 may be stored as well. For the driver this means a warning lamp, reduced propulsion and, on electric all-wheel drive, loss of the driven axle.
Possible causes
- Shorted high-side power switch in the motor B inverter medium
- Phase cable of motor B shorted to the positive high-voltage path medium
- Faulty gate driver holding a switch on low
Symptoms
- Immediate shutdown of motor B with warning lamp
- Reduced performance or loss of electric all-wheel drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C0A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.