OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C08

Drive Motor B Phase U-V-W Circuit/Open

P0C08 is the open-phase check for drive motor B, the motor B twin of P0C05. GM runs it on the 2011 Volt and the 2012 two-mode trucks: each phase is checked as the rotor passes its axis, and a phase axis current below 9 A while at least 23 A is commanded, with the rotor within 30 degrees and over 35 V on the inverter, counts as a miss. Around 200 failed samples set it, Type A, one trip. Later GM tables up to 2016 keep the same logic. GM's eAssist has only one machine and no P0C08. The usual causes are a loose three-phase terminal, an open stator winding or an inverter stage that does not conduct. Motor B then delivers no torque, the MIL lights and drive power is reduced.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 08

Possible causes

  • Loose or open three-phase terminal between inverter and motor B high
  • Open stator winding in drive motor B medium
  • Inverter stage for motor B not conducting medium

Symptoms

  • Malfunction indicator lamp after one drive
  • Reduced propulsion power
  • Engine running more often than usual

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C08

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication