OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C07

Drive Motor A Phase U-V-W Circuit High

P0C07 is the high member of the drive motor A phase circuit group: a U, V or W phase line reads higher than it should, most likely through a short to the positive high-voltage rail or a power switch that stays on. Its siblings are P0C05 for an open phase and P0C06 for a phase pulled low. No manufacturer documents P0C07 publicly; among these three, GM uses only P0C05, which watches for missing phase current. CARB requires circuit monitoring of hybrid input and output components. Because a stuck high phase drives uncontrolled current, the inverter normally disables motor A at once. The driver sees a warning lamp and loses some or all electric propulsion until the shorted part is replaced.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 07

Possible causes

  • Shorted high-side power switch in the motor A inverter medium
  • Phase cable shorted to the positive high-voltage path medium
  • Faulty gate driver holding a switch on low

Symptoms

  • Immediate shutdown of electric drive with warning lamp
  • Reduced performance or engine-only operation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C07

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication