P0C06
Drive Motor A Phase U-V-W Circuit Low
P0C06 belongs to the phase circuit group of drive motor A and reports that a U, V or W phase line sits too low, typically a short to the negative high-voltage rail or to chassis ground. P0C05 covers an open or missing phase, P0C07 the opposite high state. No manufacturer documents P0C06 for a drive motor publicly; GM's hybrid tables use only P0C05 from this trio. CARB requires hybrid input and output components to be monitored for circuit faults. Such a short usually also trips the inverter's overcurrent protection, so P0C01 or insulation faults may appear alongside. The motor controller shuts down motor A, which leaves the driver with reduced or no electric drive and a warning lamp.
Possible causes
- Phase cable or winding shorted to ground or housing medium
- Shorted low-side power switch in the motor A inverter medium
- Insulation damage from heat, moisture or chafing low
Symptoms
- Electric drive shut down with warning lamp
- Overcurrent or insulation codes stored at the same time
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C06
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.