OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C05

Drive Motor A Phase U-V-W Circuit/Open

P0C05 detects an open or missing phase between the inverter and drive motor A. GM checks each phase as the rotor passes its axis: if the peak phase axis current stays below 9 A while at least 23 A is commanded, with the rotor within 30 degrees of that axis and over 35 V on the inverter, about 200 failed samples set the code. It is Type A, one trip, on the Volt and two-mode trucks and Type B, two trips, on eAssist. Jeep lists it on the 2018/19 Wrangler eTorque with P0C01, curing it by software or a new motor generator unit. Volvo uses it in the rear axle inverter of 2020 to 2022 PHEVs and advises clearing it and test-driving before replacing parts. Expect reduced electric power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 05

Possible causes

  • Loose or open three-phase terminal between inverter and motor A high
  • Software fault, cured by update (Jeep TSB 08-144-23) medium
  • Internal fault of the motor generator unit or open stator winding medium
  • One-off event that does not return after clearing (Volvo TJ 36863) low

Symptoms

  • Propulsion system performance message or warning lamp
  • Reduced electric drive power
  • Loss of 12 V charging or noise from the motor generator on mild hybrids

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C05

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication