OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C03

Drive Motor B Current Low

P0C03 indicates that drive motor B draws less current than the controller expects for the requested torque. It is the low counterpart of P0C04 and the motor B twin of P0C00. No manufacturer documents this exact code publicly, and the GM hybrid tables use only P0C04 and P0C08 for motor B. CARB requires hybrids to monitor electric motor performance. Low current typically comes from a high-resistance cable joint, an interrupted winding path or an inverter stage that does not switch; a single missing phase is reported by GM as P0C08. In practice motor B delivers little or no torque, a warning lamp lights up and the system may fall back to the other motor or the engine.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 03

Possible causes

  • High-resistance or loose three-phase connection of motor B medium
  • Inverter power stage for motor B not delivering current medium
  • Open or damaged winding in drive motor B low

Symptoms

  • Weak or missing torque from motor B
  • Warning lamp for the hybrid or electric drive
  • Reduced performance or limp mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C03

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication