P0C02
Drive Motor B Current
P0C02 is the general current code for drive motor B, the second electric machine, such as the second motor of a two-motor hybrid or the rear motor of an electric all-wheel-drive system. It applies to a current fault that is neither classed as low (P0C03) nor high (P0C04). No manufacturer documents this exact code publicly. CARB requires monitoring of electric motor performance. The documented relative is P0C04: GM checks the phase current of motor B against 600 to 725 A, and Stellantis lists P0C04 on the 2026 Wagoneer S and Cherokee with faulty three-phase cable joints. With P0C02 stored the controller usually cuts or limits the power of motor B. Inspect the phase cabling, the winding resistance and the inverter of motor B.
Possible causes
- Loose, corroded or damaged three-phase connection of motor B medium
- Fault in the motor B inverter or its current measurement medium
- Damaged stator winding of drive motor B low
Symptoms
- Hybrid or electric drive warning lamp
- Reduced power or loss of all-wheel drive
- Limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C02
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.