OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C01

Drive Motor A Current High

P0C01 is the overcurrent check of drive motor A, meant to protect the inverter's IGBTs. GM sets it when any phase current exceeds 725 A on the 2011 Volt, 600 A on the 2012 two-mode trucks and in the 2016 to 2019 tables, or 396 A on eAssist; since 2016 a too negative d-axis current (about -540 to -310 A, depending on stator temperature) also counts. A fast and a slow counter catch sudden and intermittent faults; Type A, one trip. GM PIP5246 links it on Volt and ELR to a damaged motor 1 stator. Stellantis lists it on the 2018/19 Wrangler eTorque (motor generator unit) and on the 2026 Wagoneer S and Cherokee, there caused by cross-threaded three-phase cable bolts. Expect limp mode.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 01

Possible causes

  • Damaged or improperly torqued three-phase cable joints (Stellantis S2608000006) high
  • Damaged stator winding of motor A (GM PIP5246) medium
  • Outdated hybrid control software (Jeep TSB 08-144-23) medium
  • Failing power switch or current measurement in the inverter low

Symptoms

  • Limp mode with warning lamp
  • Reduced propulsion or engine unavailable message
  • Rough running or loud noise from the motor generator

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C01

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication