OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C00

Drive Motor A Current Low

P0C00 reports that the current of drive motor A is lower than the controller expects for the commanded torque, the counterpart of P0C01 (current high). No manufacturer documents this exact code publicly; GM and Stellantis use only P0C01 from this group. CARB requires hybrids to monitor electric motor performance. Too little current points to a high-resistance three-phase joint, an open winding path or an inverter that cannot drive the phases. GM checks a missing phase separately as P0C05. The driver usually notices weak electric drive and a warning lamp; the vehicle may switch to engine-only or limp mode.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 00

Possible causes

  • High-resistance or loose three-phase connection at motor A or the inverter medium
  • Inverter power stage for motor A not delivering current medium
  • Open or damaged winding in drive motor A low

Symptoms

  • Weak or missing electric drive torque
  • Malfunction indicator lamp or hybrid system warning
  • Vehicle runs on the engine only or in limp mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C00

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication