OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BFE

Drive Motor B Phase U-V-W Current Sensor Correlation

P0BFE applies the phase balance test to drive motor B: the controller adds the U, V and W current readings, which should cancel out, and sets the code when the absolute sum stays above a limit. GM uses 156 A on the 2011 Volt and 110 A on the 2012 and 2013 two-mode trucks (Type A, one trip, main relay closed) and 110 A for 0.0032 of 0.0038 s in the 2016 and 2019 tables (Type A). It catches a sensor that reads wrong while each signal alone stays in range, unlike the per-phase codes P0BF2 to P0BFC. GM's single-motor eAssist has no such code. Jeep lists P0BFE on the 2020 Renegade and Compass 1.3 PHEV (EMEA) with the turtle and Service 4WD lights; reprogramming the hybrid processors is the fix.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / FE

Possible causes

  • Hybrid control processor software (Jeep bulletin 08-056-21/08-057-21) high
  • One motor B phase current sensor reading wrong but still within its own limits medium
  • Faulty current sensing electronics in the power inverter module medium

Symptoms

  • Malfunction indicator lamp and hybrid warning
  • Turtle (limp home) light and Service 4WD light (Jeep)
  • Reduced power from drive motor B

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BFE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication