P0BFC
Drive Motor B Phase W Current Sensor Circuit High
P0BFC is the signal-high fault of the phase W current sensor in the motor B inverter. GM sets it above 800 A on the 2011 Volt (Type A, one trip), above 700 A on the 2012 and 2013 two-mode trucks (Type B, two trips, 10 of 15 samples) and above 700 A for 0.05 of 0.1 s in the 2016 tables or 0.1 of 0.15 s in a 2019 table (Type A). A reading this high with no matching battery current indicates the sensor, its supply or an open reference instead of actual current; true phase overcurrent of motor B is logged as P0C04, and the plausibility of all three phases together as P0BFE. With P0BFC stored the inverter derates motor B, and the hybrid system leans more on the engine and motor A.
Possible causes
- Failed phase W current sensor in the motor B inverter high
- Sensor signal shorted to the sensor supply voltage or open reference ground medium
- Poor contact at an internal or external inverter connector low
Symptoms
- Malfunction indicator lamp and hybrid warning
- Reduced power from drive motor B
- Engine runs more often because electric drive is limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BFC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.