P0BFB
Drive Motor B Phase W Current Sensor Circuit Low
P0BFB indicates that the phase W current sensor of the motor B inverter delivers a signal below its valid range. GM's limits: below -800 A on the 2011 Volt (Type A, 4 of 6 samples at 10.4 ms), below -700 A on the 2012 and 2013 two-mode trucks (Type B, two trips) and below -700 A for 0.05 of 0.1 s in the 2016 tables or 0.1 of 0.15 s in a 2019 table (Type A, one trip). The threshold lies well outside any phase current motor B can carry, so the likely cause is a sensor output stuck near ground, a failed sensor or a supply fault on the sensor board. P0BFA covers a shifted zero, P0BFC the high side. While the code is active, motor B delivers reduced or no torque.
Possible causes
- Failed phase W current sensor in the motor B inverter high
- Sensor signal or supply pulled to ground on the sensor board medium
- Poor contact at an internal or external inverter connector low
Symptoms
- Malfunction indicator lamp and hybrid warning
- Reduced power or no contribution from drive motor B
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BFB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.