OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BF6

Drive Motor B Phase V Current Sensor Circuit Range/Performance

P0BF6 is the performance check of the phase V current sensor in the motor B inverter, implemented by GM as a zero offset test. The offset is learned at every start with no current through the motor and must stay within 30 A on the 2011 Volt (Type A, P0BEB/P0BEC not active, as printed in the table) and in the 2016 tables (Type A, 0.1 s), within 30 A on the 2012 and 2013 two-mode trucks (Type B, two trips) and within 35 A in a 2019 table (Type A, 0.4 s). A shifted zero would skew torque control and the phase current balance. Jeep names P0BF6 as Drive Motor B Inverter Phase V Current Sensor Circuit Range/Performance on the 2020 Renegade and Compass 1.3 PHEV (EMEA), fixed by reflashing the hybrid control processors.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / F6

Possible causes

  • Hybrid control processor software (Jeep bulletin 08-056-21/08-057-21) high
  • Zero point of the motor B phase V current sensor drifted past the limit medium
  • Faulty current sensing electronics in the power inverter module medium

Symptoms

  • Malfunction indicator lamp
  • Turtle (limp home) light and Service 4WD light (Jeep)
  • Reduced electric drive power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BF6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication