P0BF5
Drive Motor B Phase V Current Sensor Circuit
P0BF5 stands for a general circuit fault of the phase V current sensor in the motor B inverter, an electrical problem the controller does not narrow down to offset, low or high. No manufacturer documents this exact code publicly. GM's hybrid tables for the 2011 Volt, the 2012 and 2013 two-mode trucks and the 2016 to 2019 models use only the specific siblings P0BF6, P0BF7 and P0BF8; GM's single-motor BAS Plus (eAssist) system has no motor B codes at all. CARB requires circuit monitoring of hybrid sensors. Since the three phase currents of motor B are used together and their sum is cross-checked (P0BFE), losing the V signal normally forces motor B into restricted operation.
Possible causes
- Failed phase V current sensor in the motor B inverter high
- Supply or signal fault on the inverter's sensor board medium
- Software fault in the motor B control processor low
Symptoms
- Hybrid system warning and malfunction indicator lamp
- Reduced power from drive motor B
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BF5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.