OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BF0

Drive Motor A Phase W Current Sensor Circuit High

P0BF0 is the high-signal fault of the phase W current sensor in the motor A inverter. GM sets it above 700 A for 0.05 of 0.1 s in the 2016 tables or 0.1 of 0.15 s in a 2019 table, Type A, one trip; above 700 A, Type B, two trips, on the 2012 two-mode trucks; above 440 A, Type B, in the BAS Plus (eAssist) table; the 2011 Volt uses 800 A limits for this sensor family. A value this high without matching battery current points to the sensor, its supply or an open reference rather than to real overcurrent, which GM reports separately (P0C01). With P0BF0 active, GM's eAssist logic switches to sensorless current control and suspends P0BFD, so motor A is limited until repair.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / F0

Possible causes

  • Failed phase W current sensor inside the inverter high
  • Sensor signal shorted to the sensor supply voltage or open reference ground medium
  • Poor contact at an internal or external inverter connector low

Symptoms

  • Malfunction indicator lamp and hybrid warning
  • Reduced power from drive motor A

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BF0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication