P0BEE
Drive Motor A Phase W Current Sensor Circuit Range/Performance
P0BEE checks the phase W current sensor of the motor A inverter for a plausible zero point. GM learns the sensor offset at each start while no current flows and sets the code above 30 A (2011 Volt and 2016 tables, Type A; 2012 two-mode trucks, Type B) or above 35 A (2019 table, Type A). In GM's BAS Plus (eAssist) table P0BEE is one of the faults that switch current control to a sensorless alternate mode, and it blocks the phase sum check P0BFD. Jeep lists P0BEE as Drive Motor A Inverter Phase W Current Sensor Circuit Performance on the 2020 Renegade and Compass 1.3 PHEV (EMEA), with turtle and Service 4WD lights, fixed by a hybrid control processor update.
Possible causes
- Hybrid control processor software (Jeep bulletin 08-056-21/08-057-21) high
- Zero offset of the phase W current sensor drifted beyond the limit medium
- Faulty sensing electronics in the power inverter module medium
Symptoms
- Malfunction indicator lamp
- Turtle (limp home) light and Service 4WD light (Jeep)
- Reduced electric drive power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BEE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG01 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG02 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2011/11OBDG01 HYBRID Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2012/12OBDG06 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG05C Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2021/MC-10194050-9999.pdf
- static.nhtsa.gov/odi/tsbs/2021/MC-10194052-9999.pdf