P0BEA
Drive Motor A Phase V Current Sensor Circuit Range/Performance
P0BEA is the performance check of the phase V current sensor in the motor A inverter. GM implements it as an offset test: with no current flowing at start-up, the learned zero point must stay within 30 A (2011 Volt, 2016 tables, Type A; 2012 two-mode trucks, Type B, with P0BEB/P0BEC not active) or 35 A (2019 table, Type A, after a 0.4 s delay). A sensor whose zero has drifted would distort torque control and the phase current balance. Jeep names P0BEA among the phase current codes of the 2020 Renegade and Compass 1.3 PHEV for EMEA markets, together with the turtle and Service 4WD lights; the remedy is a software update of the hybrid control processor and power inverter.
Possible causes
- Hybrid control processor software (Jeep bulletin 08-056-21/08-057-21) high
- Zero offset of the phase V current sensor drifted beyond the limit medium
- Faulty sensing electronics in the power inverter module medium
Symptoms
- Malfunction indicator lamp
- Turtle (limp home) light and Service 4WD light (Jeep)
- Reduced electric drive power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BEA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG01 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG02 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2011/11OBDG01 HYBRID Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2012/12OBDG06 Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2021/MC-10194050-9999.pdf
- static.nhtsa.gov/odi/tsbs/2021/MC-10194052-9999.pdf