OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BE6

Drive Motor A Phase U Current Sensor Circuit Range/Performance

GM uses P0BE6 as the offset check of the phase U current sensor in the motor A inverter. At every start, while no current flows, the controller learns the sensor's zero offset; if it exceeds 30 A (2011 Volt and 2016 tables, Type A; 2012 two-mode trucks, Type B) or 35 A (2019 table, Type A), the code sets. In GM's BAS Plus (eAssist) table a fault of this sensor makes current control switch to an alternate mode that does not use the current sensors. Jeep lists P0BE6 with the other phase current codes on the 2020 Renegade and Compass 1.3 PHEV for Europe, with the turtle and Service 4WD lights, and fixes it by reprogramming the hybrid control processors.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / E6

Possible causes

  • Hybrid control processor software (Jeep bulletin 08-056-21/08-057-21) high
  • Zero offset of the phase U current sensor drifted beyond the limit medium
  • Faulty sensing electronics in the power inverter module medium

Symptoms

  • Malfunction indicator lamp
  • Turtle (limp home) light and Service 4WD light (Jeep)
  • Reduced electric drive power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BE6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication