OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BE4

Drive Motor Inverter Temperature Sensor F Circuit Intermittent/Erratic

P0BE4 stands for brief dropouts or jumps in the signal of inverter temperature sensor F, which GM's hybrid tables place at phase W of the motor B inverter. The reading returns to normal between events, which separates it from the steady low and high faults P0BE2 and P0BE3. GM does not list this code, and no other manufacturer documents P0BE4 publicly. CARB's monitoring requirement for hybrid sensor circuits covers such intermittent faults as well. Typical sources are a connector with poor contact, a cracked solder joint or a thermistor whose resistance has become unstable. While the signal is distrusted, the controller tends to cut motor B power, and the fault can disappear before the workshop sees it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / E4

Possible causes

  • Loose, corroded or vibrating connector at the inverter high
  • Cracked solder joint on the inverter sensing board medium
  • Ageing thermistor with unstable resistance low

Symptoms

  • Malfunction indicator lamp that comes and goes
  • Occasional power reduction of drive motor B

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BE4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication