P0BDC
Drive Motor Inverter Temperature Sensor E Circuit Range/Performance
P0BDC checks whether inverter temperature sensor E, GM's phase W sensor in the motor A inverter, agrees with the vehicle after a long stand. The 2016 and 2018 tables compare it after a cold soak with a calculated average temperature; more than 20 °C apart for 0.525 of 0.625 s sets Type B, two trips. A 2019 table uses the same 20 °C as Type A. The 2011 Volt compares it with power electronics coolant temperature (20 °C, Type A); the 2012 and 2013 two-mode trucks use 15 °C after at least 360 minutes off (Type B). GM bulletin PIC6303A says that on 2016-18 Volt, Malibu, LaCrosse and Regal the code has no remedial action; the inverter is replaced only together with P0AC4.
Possible causes
- Phase W thermistor drifting out of tolerance medium
- Uneven inverter cooling or residual heat after the soak period medium
- Failing power inverter module (replace only with P0AC4 per GM PIC6303A) low
Symptoms
- Malfunction indicator lamp after two drives, often without any drivability change
- Code found during inspection without customer complaint
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BDC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG02 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG01 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2011/11OBDG01 HYBRID Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG06 Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2018/MC-10129069-9999.pdf