P0BDA
Drive Motor Inverter Temperature Sensor D Circuit Intermittent/Erratic
P0BDA covers an inverter temperature sensor D signal that changes in steps or drops out briefly. Real temperatures of a liquid-cooled inverter move smoothly, so such jumps suggest a contact problem or interference from the high-voltage switching, which a Hitachi patent on inverter systems names as a typical disturbance of the small sensor signal. No manufacturer documents this exact code publicly; GM's tables cover sensor D, the second sensor of the motor B inverter, only with P0BD7, P0BD8 and P0BD9. CARB requires hybrid sensor inputs to be monitored for erratic behaviour as well. Because the fault comes and goes, freeze-frame data and live data during a wiggle test are the most useful clues.
Possible causes
- Loose or corroded contact at the inverter module high
- Intermittent fault inside the power inverter module medium
- Interference from the high-voltage circuit on the sensor signal low
Symptoms
- Warning lamp that comes and goes
- Brief power reductions while driving
- Jumping inverter temperature in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BDA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.