OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BD7

Drive Motor Inverter Temperature Sensor D Circuit Range/Performance

P0BD7 is the plausibility check for inverter temperature sensor D, GM's second sensor in the motor B inverter. After a cold soak its reading is compared with an average vehicle temperature; more than 20 °C apart sets the code, Type B, two trips, on the 2016 Volt and Type A in a 2019 table. The 2011 Volt compares with power electronics coolant and transmission temperature after 6 h off (20 °C, Type A); GM's 2012 and 2013 tables use 15 °C after 360 min, two trips. GM bulletin PIC6303A lists P0BD7 with the other inverter thermistor codes on 2016-18 Volt, Malibu, LaCrosse and Regal: alone it causes no noticeable effect, and the inverter is replaced only if P0AC4 set at the same time.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / D7

Possible causes

  • Inverter temperature sensor D drifting out of tolerance medium
  • Failing power inverter module medium
  • Uneven inverter coolant flow after soak low

Symptoms

  • Malfunction indicator lamp, often after two trips
  • Often no noticeable drivability change
  • Further inverter temperature codes may be stored

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BD7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication