OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BD2

Drive Motor Inverter Temperature Sensor C Circuit Range/Performance

P0BD2 checks whether inverter temperature sensor C, GM's second sensor in the motor A inverter, agrees with the other temperatures after a cold soak. More than 20 °C apart sets it: Type B, two trips, on the 2016 Volt; Type A in a 2019 table; Type A on the 2011 Volt and 2016 ELR, compared with coolant and transmission temperature after 6 h off. GM's 2012 and 2013 tables use 15 °C after 360 min. GM bulletin PIC6303A says that on 2016-18 Volt, Malibu, LaCrosse and Regal the code alone needs no repair; the inverter is replaced only with P0AC4. GM fixes it by software on the 2017 Bolt EV and Ampera-e. Porsche replaces a coolant hose with a sticking thermostat on the Cayenne S E-Hybrid.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / D2

Possible causes

  • Inverter module software (GM bulletin 18-NA-064, Bolt EV/Ampera-e) medium
  • Sticking thermostat in the power electronics coolant hose (Porsche Cayenne S E-Hybrid) medium
  • Inverter temperature sensor C drifting out of tolerance medium
  • Failing power inverter module low

Symptoms

  • Malfunction indicator lamp, often without drivability change
  • Propulsion power reduced message (Bolt EV)
  • Red hybrid warning in the cluster (Porsche)

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BD2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication