OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BCD

Generator Inverter Temperature Sensor A Circuit Range/Performance

P0BCD flags a generator inverter temperature sensor A whose signal is electrically valid but does not fit the operating state, for example a value stuck at one temperature or far from the other temperatures after a long soak. Ford documents this exact code: on 2020 Lincoln Aviator 3.0L hybrids built up to 18 July 2020, P0BCD stored in the inverter system controller (SOBDMC) lights the MIL and is caused by software; the fix is reprogramming that module. Patents by Hino and Mitsubishi Electric describe how such checks work, comparing heat generated in the inverter with the measured temperature change or detecting a stuck sensor. Circuit faults go to P0BCE or P0BCF instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / CD

Possible causes

  • Inverter controller software (Ford SSM 49120, Lincoln Aviator 2020) high
  • Sensor drifting or stuck at one value medium
  • Uneven inverter coolant flow distorting the comparison low

Symptoms

  • Malfunction indicator lamp
  • Often no noticeable change in driving
  • Hybrid system warning message possible

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BCD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication