P0BCB
Hybrid/EV Battery Pack Cooling Fan 1 Sense Circuit Intermittent/Erratic
P0BCB flags a speed feedback from battery cooling fan 1 that drops out or jumps in a way no rotating fan can, typically a loose contact in the feedback line. No manufacturer documents this exact code publicly; GM's 2016 and 2018 hybrid tables, which watch the same pulse feedback, list only performance, low and high (P0BC8, P0BC9, P0BCA). Toyota's battery cooling patents show the principle: the speed measured by a rotation sensor on the fan motor is compared with the target under steady command, so a jumping signal makes that comparison worthless. CARB requires the inputs of battery thermal management to be monitored. Wiggle-test the fan connector and harness. An open line is P0BC7; fan 2 has P0D63.
Possible causes
- Loose or corroded terminal in the feedback circuit high
- Chafed harness near the fan or battery case medium
- Intermittent fault in the fan's speed sensor low
Symptoms
- Hybrid system warning or MIL, sometimes coming and going
- Fan speed reading jumping on the scan tool
- Occasional power reduction
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0BCB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.