OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BC8

Hybrid/EV Battery Pack Cooling Fan 1 Sense Range/Performance

P0BC8 compares the speed fed back by battery cooling fan 1 with what the controller commanded. GM's 2016 and 2018 hybrid tables run two checks. With the fan enabled at 11 to 89 % duty for more than 11 s, the filtered difference between commanded and reported speed must stay inside calibrated limits; large errors fail within seconds, small ones after up to 43 s. With the fan off for more than 20 s, a reported speed above 120 rpm fails in 24 of 32 samples at 250 ms. It is Type B, two trips, and waits while drive or sense circuit codes are active. A dusty or worn fan that cannot reach its speed is the usual cause; a fan turning while commanded off points to a stuck drive. The circuit cases are P0BC7, P0BC9 and P0BCA.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / C8

Possible causes

  • Dust-clogged impeller, blocked intake or worn fan bearing high
  • Fan keeps running while commanded off (stuck drive or relay) medium
  • Fan electronics reporting a wrong speed medium

Symptoms

  • MIL on after two trips
  • Weak airflow or unusual fan noise from the battery intake
  • Reduced electric assist when the pack warms up

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0BC8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication