P0BC7
Hybrid/EV Battery Pack Cooling Fan 1 Sense Circuit/Open
Many battery cooling fans report their actual speed back to the controller as a pulse signal; Toyota patents describe a rotation sensor on the fan motor whose measured speed is compared with the target. P0BC7 means this feedback line for fan 1 is open or carries no usable signal. No manufacturer documents this exact code publicly; GM's 2016 and 2018 hybrid tables cover the same feedback only through P0BC8, P0BC9 and P0BCA. CARB requires the electrical inputs of battery thermal management to be monitored. The fan may still turn, but the controller can no longer confirm it and usually limits power to protect the pack. Faults in the drive circuit are P0A81 to P0A85; fan 2 feedback has its own codes P0D5F to P0D63.
Possible causes
- Open feedback wire or loose pin at the fan connector high
- Failed speed sensor or electronics inside the fan unit medium
- Faulty feedback input in the controlling module low
Symptoms
- Hybrid system warning or MIL on
- Reduced electric assist or charging power
- Fan audible even though the code reports no feedback
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0BC7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.