OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BC6

Hybrid/EV Battery Temperature Sensor E Circuit Intermittent/Erratic

P0BC6 flags erratic behaviour of battery temperature sensor E: the reading jumps far faster than the heavy battery mass could warm or cool. GM documents the method in its 2016 and 2018 hybrid tables (16OBDG02, 18OBDG02). Sampling every 100 ms, the controller adds up the absolute changes of the sensor value over a 10-sample window; a sum above 10 fails the window, and 4 failed windows out of 5 store the code as Type B, two trips, provided system voltage is above 10.2 V. The same logic covers the other pack sensors. The older Volt, Two-Mode and eAssist tables list no erratic code for sensor E. Typical culprits are a loose terminal, a cracked wire or a connector not fully latched after pack work; if several sensors jump at once, suspect the sensing board.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / C6

Possible causes

  • Loose terminal or unlatched connector of sensor E high
  • Cracked or chafed sensor wire breaking contact intermittently medium
  • Sensing board fault affecting several temperature inputs low

Symptoms

  • MIL on after two trips
  • Sensor E value jumping on the scan tool
  • Occasional power reduction

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BC6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication