OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BC3

Hybrid/EV Battery Temperature Sensor E Circuit Range/Performance

P0BC3 is the plausibility check for battery temperature sensor E, GM's sensor 5: its reading is compared with the other pack sensors, which should agree closely. GM's 2016 hybrid table fails it when E is more than 25 °C away from the average of the others in 50 of 67 samples; the 2018 CT6 plug-in table more than 20 °C for 5 s within 6.7 s; the eAssist mild hybrid (13OBDG05C) allows only 8.55 °C, and only after the module has been off for more than six hours. All are Type B, two trips. The check is suspended while circuit codes are active, so it points to a sensor that reads wrongly but in range, or to a real hot spot. Volt bulletin 18-NA-342 counts it among codes that set falsely in cold weather and fixes them by reprogramming.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / C3

Possible causes

  • Sensor E drifting or poorly seated on its cell group medium
  • Module software setting the code falsely in the cold (GM Volt) medium
  • Real local hot spot from a weak cell group or blocked airflow low

Symptoms

  • MIL on after two trips
  • Battery too cold or reduced power message
  • Limited charge and discharge power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BC3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication