OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BC0

Hybrid/EV Battery Pack Cooling Fan Supply Voltage Circuit Low

P0BC0 reports that the voltage feeding the battery cooling fan is lower than expected while the fan is switched on. A short to ground downstream of the fuse, a corroded connector or a relay with burnt contacts drops the voltage, so the fan turns slowly or not at all. No manufacturer documents this exact code publicly. Toyota's hybrid controller measures the fan supply on the auxiliary battery side and raises the duty when it is low, which shows why a sagging feed matters for cooling. CARB asks for circuit monitoring of all battery thermal management parts. The open case is P0BBF, the high case P0BC1 (GM: welded relay). A weak 12 V battery can cause a sag too, so check it first. Expect reduced power when the pack heats up.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / C0

Possible causes

  • Fan supply wire chafed and shorted to ground medium
  • Burnt fan relay contacts or corroded terminals causing voltage drop medium
  • Weak 12 V auxiliary battery or poor ground medium
  • Seizing fan motor pulling excessive current low

Symptoms

  • Hybrid system warning or MIL on
  • Battery fan runs slowly or noticeably weaker
  • Reduced electric assist when the pack is warm

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0BC0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication