P0BBD
Hybrid/EV Battery Pack Voltage Variation Exceeded Limit
P0BBD means the spread between cells or blocks of the pack has grown beyond what the controller accepts. GM used it on the two-mode hybrids, where a difference of more than 1.5 V between adjacent block voltages in three of three samples at 1 s, with battery current above 0.2 A, set a Type B fault labelled as end-of-life deviation. On the Chevrolet Bolt EV, bulletin 22-NA-151 links it to reduced propulsion and charging capped at 30 % and names cases induced by driving style that need reprogramming, otherwise a pack replacement. Volkswagen reports it on the ID.4 from cells with increased self-discharge, Audi on the Q4 e-tron with a drive system that cannot be activated, and Stellantis on the Wrangler 4xe.
Possible causes
- Cells or modules with increased self-discharge or capacity loss high
- Controller software or cell capacity adaptation needing an update medium
- Aged battery pack at end of life medium
- Cell balancing unable to equalise the pack low
Symptoms
- MIL or electrical system warning
- Reduced propulsion power and capped state of charge
- Reduced electric range
- Drive system cannot be activated in severe cases
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BBD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2012/12OBDG06 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG06 Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10217634-0001.pdf
- static.nhtsa.gov/odi/tsbs/2024/MC-10252092-0001.pdf
- static.nhtsa.gov/odi/tsbs/2024/MC-11009975-0001.pdf
- static.nhtsa.gov/odi/tsbs/2025/MC-11020751-0001.pdf