P0BBB
Hybrid/EV Battery Voltage Sense Z Circuit High
If the Z channel shows a cell voltage above the upper limit, the controller sets P0BBB. The 2016 Volt battery module uses 4.8 V or more for 1.4 s in a 2 s window, Type A, and checks first that the cell monitoring slave is communicating and no open sense line is reported. The 16OBDG02 programme fails above 4.90 V in 14 of 18 samples, and the eAssist mild hybrid fails above 4.65 V in seven of ten samples with a healthy 12 V supply, Type B over two trips. Lithium-ion cells are not meant to exceed these values, so the reading normally points to a short towards the higher neighbour, a faulty input or a corrupted measurement, and only rarely to a truly overcharged cell. Charging is stopped as a precaution.
Possible causes
- Sense lead Z shorted towards the higher neighbour cell high
- Faulty measuring input Z medium
- Cell Z overcharged low
Symptoms
- MIL and charging stopped
- Reduced regeneration
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BBB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.