P0BBA
Hybrid/EV Battery Voltage Sense Z Circuit Low
P0BBA is stored when the voltage measured on channel Z falls below the lower limit. In the 16OBDG02 programme the hybrid processor checks Z every 100 ms and fails it below 0.20 V in 14 of 18 samples, a Type A fault, but only with a system voltage above 10.20 V and no open-circuit fault on the cell. GM's 2019 battery energy control module and the 2011 Volt use 0.2 V or less over 1.4 s within 2 s. This rules out a simple open lead, which would have set P0BB8 first. What remains is a short in the Z wiring or connector, a failed channel on the monitoring board or a cell whose voltage has actually collapsed. The battery is normally limited to protect the other cells.
Possible causes
- Short in the Z sense wiring or connector high
- Failed channel Z on the monitoring board medium
- Voltage collapse of cell Z low
Symptoms
- MIL and hybrid or EV warning
- Limited power and charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BBA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.