P0BB9
Hybrid/EV Battery Voltage Sense Z Circuit Range/Performance
With P0BB9 the controller says that sense Z does not track the pack: the value is within limits, but it stays still or moves the wrong way while the other cells change. GM's 2019 hybrid powertrain control processor 2 enables the comparison once the system voltage is above 10.20 V and the average cell voltage shifts by more than 0.022 V, then demands a trend of at least 0.005 V on Z; 35 failures in 40 samples are Type A. The 2016 Volt variant fails after 7 s within 8 s. In the eAssist mild hybrid, Z has to follow at least half of an average movement above 0.045 V, 20 of 40 samples, Type B. A recalibrated controller or a replaced monitoring board is a more common fix than a new cell.
Possible causes
- Z reading static despite changing pack voltage high
- Monitoring board or controller calibration fault medium
- Cell Z with abnormal charge and discharge behaviour low
Symptoms
- MIL, driving largely unaffected
- Possibly lower assist or regeneration
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BB9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.